Forums

The Chesapeake Area Killifish Club :: Forums :: General :: Equipment & DIY Ideas
 
<< Previous thread | Next thread >>
plastic fittings for water/air systems:
Moderators: Tarcan Cevik, In2fish, cdiaz
Author Post
clearsky
Mon Jan 18 2010, 03:56pm

Registered Member #5
Joined: Mon Dec 21 2009, 05:25pm
Location: Virginia
Posts: 80
Whoever has the info on the company that sells the differnt fittings for the air/water flow sytems, please post it up here for us.
thanks
david sombach

orchid addict gone to the dogs (and now Killies)
Back to top
Niko
Mon Jan 18 2010, 06:27pm
Registered Member #14
Joined: Fri Jan 01 2010, 04:09pm
Posts: 59
David as a club we own some of those valves, we are trying to recover them from Koran .I believe we have at least 800 of the black Water/Air Valves. Jim Graham is working on getting our inventory transferred back to the club. Regards Nick V. (niko)
Back to top
shermo
Fri Jan 29 2010, 02:28pm
Registered Member #8
Joined: Sun Dec 27 2009, 12:29am
Posts: 37
I DO HAVE ACESS TO SMALL TEES AND THOSE MICRO 1/4 TURN ON/OFF FITTINGS,IVE GOT 2 PLACES CLOSE TO ME THAT SELL THAT STUFF AND AIR LINE VERY CHEAP AS WELL AS OTHER STUFF THAT I USE IN MY FISH ROOM,ALSO WATER TEES,SILICONE TUBING FOR DOSING PUMPS,NYLON REIFORCED TUBING,VIYNL TUBING OF ALL SIZES,ORINGS,RUBBER SEALS,BULKHEAD FITTINGS,THE ONES THAT COME WITH THE STRAINER MADE SPECIFICALLY FOR FISH AS WELL AS GANG VALVES,OVERFLOW U TUBES,CYCLOPS(COMES IN BARS AND BULK PACKS,U NAME IT ,I CAN PROBABLY GET IT,IM IN A GOOD AREA FOR FISH EQUIPMENT,IT MAY NOT ALWAYS BE CHEP BUT I CAN GET THE HARDER TO OBTAIN STUFF USUALLY FROM ONE OF THESE PLACES.

supersherm
Back to top
clearsky
Sat Jan 30 2010, 10:53am

Registered Member #5
Joined: Mon Dec 21 2009, 05:25pm
Location: Virginia
Posts: 80
Sherm:
So you can get the elbows, with the bulkhead fittings??
I need to get with you so I can give you a grocery list of things i need.... I will talk to you about this..thanks.
david

orchid addict gone to the dogs (and now Killies)
Back to top
shermo
Sat Jan 30 2010, 11:28am
Registered Member #8
Joined: Sun Dec 27 2009, 12:29am
Posts: 37
the guy i deal with has just about evrything,the bulkheads he sells like a kit,comes with the seals,strainer,but i dont think this is a 90 degree type bulkhead,its a strait bulkhead but im sure he has them,he also sells light ballasts,mh bulbs,all lkinds of stuff,he specializes in salt water but carrys alot of the diy stuff on hand.

supersherm
Back to top
DougGosnell
Thu Mar 11 2010, 09:02pm
Registered Member #7
Joined: Wed Dec 23 2009, 01:16am
Posts: 25
Will anyone be bringing the fittings David was using to return the water to the shoeboxes? I am interested in maybe 200 or so of these.

Thanks
Back to top
DougGosnell
Thu Mar 11 2010, 09:15pm
Registered Member #7
Joined: Wed Dec 23 2009, 01:16am
Posts: 25
Will anyone be bringing the fittings David was using to return the water to the shoeboxes? I am interested in maybe 200 or so of these.

Thanks
Back to top
Niko
Thu Mar 11 2010, 09:15pm
Registered Member #14
Joined: Fri Jan 01 2010, 04:09pm
Posts: 59
I believe we have that many left I'll talk to Jim let you know Nick V.
Back to top
 

Jump:     Back to top

Syndicate this thread: rss 0.92 Syndicate this thread: rss 2.0 Syndicate this thread: RDF
Powered by e107 Forum System